Speed of Gold Chain Making Machine

www.chainmachines.com

Gold Chain Making Machine

Plasma welding system for your chain

Gold Chain Making Machine vs Traditional Way of Making it

Traditionally, gold jewelry chain making is hand made in a way that requires soldering, it's made using gold wire, solder and flux that is joined at a seam and heated over flame.

if using machines, the wires will be feed into a spiral maker and forming out the links to allow the knives to cut and shaped by the pincers and facons.

With plasma welding, the chain made by machines does not need to undergo the furnace process to solder the chains, instead, its being welded during the making process, simpler and efficient.

Plasma welding is considered a alternate choice compared to traditional chain making using furnace, and its good for 24k gold because it does not reduce the purity of the gold chain and it helps to weld the chain.

www.chainmachines.com

TraTraditional gold jewelry chain-making is done in a way that requires soldering and a simpler way that does not. Gold soldering is done using gold wire, solder and flux that is joined at a seam and heated over a flame. The chain is formed in separate links that must be soldered in place. Wire-only gold chains involve the use of cut sections of gold wire that are linked together, with the ends of one section twisted around the loops of another. Many different unique designs can be made this way. In the machine industry, originality is usually added through decorative processes--like the use of diamond-cutting machines and stamp machines to make precise designs in the metal.

Read more : http://www.ehow.com/about_4675525_gold-jewelry-chainmaking.html

Traditional gold jewelry chain-making is done in a way that requires soldering and a simpler way that does not. Gold soldering is done using gold wire, solder and flux that is joined at a seam and heated over a flame. The chain is formed in separate links that must be soldered in place. Wire-only gold chains involve the use of cut sections of gold wire that are linked together, with the ends of one section twisted around the loops of another. Many different unique designs can be made this way. In the machine industry, originality is usually added through decorative processes--like the use of diamond-cutting machines and stamp machines to make precise designs in the metal.

Read more : http://www.ehow.com/about_4675525_gold-jewelry-chainmaking.html

Gold Chain Making Machine Tools

Gold Chain Making Machines Tools

Tools Related to Gold Chain Making Machine

To make a gold chain making machine make the chain link, you need a pin, a spiral maker, a pair of facons and a pair of pincers.


The Pin and Spiral Maker makes the shape of the Chain according to the requirement based on diameter and the wire size according to curb chain or cable chain etc.

Pincers will grip the link after its being cut by the horizontal and vertical knives to allow the Facons to close the link gap and forming the shape of the link.

Material used for the tools are also one of the factors deciding the quality of the chain.

for more information please review at www.chainmachines.com
 

Anchor Chains

Automatic machine for the production of Triple, Double, Single Curb and Cable Chain.

Changing the tools of the machine can be prepared in a very short time to work with different wire diameters.

The mechanical parts of the machine are made of specially treated cast iron, steel and tungsten.

Continuous forced lubrication at all friction points, oil reservoir tank and pump are built into the structure.

Parts are subject to sever wear in hard metal.

Electronic speed controller.

Low tension lamp in conformity with international standards.

A new double air blow device makes easier to set the machine to allow smooth operation.

Chain fault detector, with automatic regulation, senses the change from triple or double to single chain, with a safety micro switch senses chain fall absence.

Rambo Chain

Rambo Chain, sometimes looks identical to Chaine Americane if the picture is not clear enough

This is using double curb weaving series and changing the tools of the equipment will be able to make this chain design out.

www.chainmachines.com

Gold chain making machine

Automatic gold chain making machine with plasma soldering system featuring high operating capacity, which allows both the production and soldering of curb chain, double curb chain, cable chain, spiga chain, without using powders or soldering materials, with wire dimensions from 0.20mm onwards to 1.50mm.

the high operating speed is achieved thanks to the precision of the tools and its outstanding reliable components, this allows the production of the soldered chain at a speed of maximum 280 rings per minute.

Changing the tools of the machine can be prepared in a very short time to work with different wire diameters.

its easy operation method allows quick and trouble free replacement of the tools and parts. it comes with a chain density sensor, electronic speed regulator, continuous forced lubrication at all friction points, reservior tank and build in pump in the chain making machine structure.

the production of the gold chains are suitable with alloy percentages at the optimum carat weight, with original alloy colours as per melting, with a better shine of the wire, and also with 24kt Gold.

www.chainmachines.com